Safety Equipment Repair Order (SERO)

   Minimize


A Maryland State Trooper or other law enforcement officer may issue a Safety Equipment Repair Order (SERO) to the operator of a vehicle that is observed to be defective or not functioning in accordance with Maryland laws and regulations.  Appendix A lists the types of defects for which a SERO can be issued. 

The SERO requires the vehicle owner to have the problems cited on the SERO repaired within 10 days, and a certification of the repair to be submitted to the Maryland State Police (MSP) Automotive Safety Enforcement Division (ASED) within 30 days.

An SERO can be issued for defective safety equipment on all classes of Maryland registered motor vehicles, trailers, and semi-trailers except those vehicles displaying the following types of license plates:

  • Historic license plates;
  • Interchangeable license plates (dealer, transporter, finance company, special mobile equipment); and
  • Temporary registration plates (cardboard).

How do I resolve a Safety Equipment Repair Order (SERO)?

To resolve an SERO issued for your vehicle, you must have the vehicle repaired within ten (10) days.  The repairs may be made at any garage or repair shop of your choice, or you may do it yourself.

After the vehicle is repaired, you will need to take the SERO (Copy 3, 4 and 5) to an Maryland authorized inspection station in order to have the repair inspected and certified.  The registered inspection mechanic will sign and stamp all copies of the SERO to certify that all defects cited on the SERO have been fixed correctly. The registered inspection mechanic will retain Copy 3 (yellow) for his/her records.

  • If all of the defects identified on the SERO are followed by an asterisk (*), indicating that the repair can be visually inspected, it can be inspected free of charge at an authorized inspection station. You may also ask a Maryland State Police trooper or local police officer in a participating police department to certify the repair. The Trooper or officer must inspect your vehicle during daylight hours, while the weather is not inclement.  However, be sure that all of the defects identified on your SERO have an asterisk.

When the repair has been certified and the SERO has been signed and stamped, you must submit Copy 5 (buff card stock) of the SERO to the Maryland State Police ASED.  The copy must be submitted no later than 30 days after the date on which the SERO was issued.   Either mail or hand-deliver Copy 5 of the SERO to:

Maryland State Police
Automotive Safety Enforcement Division (ASED)
6601 Ritchie Highway, NE
Glen Burnie, MD 21062

You should retain Copy 4 (goldenrod) of the SERO for your records.

What happens if I don’t return the signed copy of my SERO within 30 days?

If the Maryland State Police ASED does not receive the signed Copy 5 of your SERO within 30 days after the date that the SERO was issued, you will receive a notice that your vehicle registration will be suspended.

The suspension will take place five (5) days after the notice of suspension is mailed.  When your vehicle registration is suspended you cannot:

  • Legally drive the vehicle; or
  • Renew the vehicle's license plates.

If your vehicle's registration is suspended, you must immediately return the license plates to an MVA branch office.  If you do not return the license plates within 10 days after the date on which the suspension notice was mailed, a tag pick up order will be issued.  The license plates then will be subject to immediate confiscation by a police officer.

What should I do if I got rid of my vehicle after the SERO was issued?

If your vehicle has been traded, sold, repossessed, junked or otherwise disposed of, you must submit a document that indicates the vehicle’s disposition and includes the vehicle identification number (VIN), make, model, title number, and the date of the disposition.  The document should be attached to Copy 5 of the SERO when it is submitted to the ASED.  The type of documentation required depends upon the vehicle’s disposition:

  • Traded – submit a copy of the contract with the dealer who accepted the vehicle as trade-in.
  • Sold – submit a notarized statement signed by you.
  • Repossessed – submit a statement on the letterhead of the company that repossessed the vehicle (usually a financial institution).
  • Junked – submit a statement on the letterhead of the automotive dismantler or recycler who received the vehicle.
  • Otherwise disposed of – submit a notarized statement signed by you.

What should I do if I lost my SERO and need a duplicate?

If you lose your SERO, you may contact the MSP Automotive Safety Enforcement Division or your local MSP barracks weekdays (excluding state holidays) between 8:30 a.m. and 4:30 p.m., and ask about obtaining a copy.

 

Fees:

  • The vehicle owner must pay for the repairs needed to correct the vehicle defect(s).
  • There may be a fee charged by the registered inspection mechanic based on a flat, hourly rate, which is set by the inspection station where the registered inspection mechanic works.  Even if the repaired defect can be visually confirmed, the mechanic may still charge a fee if the inspection requires jacking, lifting, measuring, or testing the vehicle. 

    ASED Locations, days and hours


APPENDIX A
Safety Equipment Repair Order (SERO) Defects

Number

Defect Description

Comments

50

Brakes

   

51

Tires

   

52

Steering

   

53

Exhaust System

    

54*

Windshield Wipers

   

55*

Headlights

• Any required or permitted bulb fails to light
• Bulbs must be white in color.

55

Headlight aim

• Headlight beam is not properly aimed.

56*

Taillights

   

57*

Horn

   

58

Driver's Seat

   

59

Suspension / Shocks

   

60*

Bumpers

   

61*

Glass

   

61

TINT

The percentage of outside light shining through the glass is less than 35%.

Red, Yellow, and Amber window tint is prohibited on all windows.

Reflective window tint is prohibited on all vehicles.

62*

Load Cover

   

64*

Stop Lights

   

65*

Tag Light(s)

   

66*

Dash Lights

   

67

Wheel Alignment

   

68*

Rearview Mirrors

   

69*

Door Latch / Handle

   

70

Fuel System

   

70*

Cap

   

71*

Turn Signals

   

72

Wheels / Lugs

   

73*

Hood Catch(s)

   

74

Floor / Trunk Pan(s)

   

76*

Fender(s) / Flap(s)

   

77

Speedometer / Odometer

   

78*

Hazard Warning Lamp

   

79*

Park Lamp

   

80*

Side Marker Lamp

   

81

Fog / Auxiliary Driving Lamps

   

82*

Emergency Warning Lamp

   

83*

Back Up Lamp

   

84*

Reflectors

   

85

External Air Brake Component

   

86*

Low Air Warning Device

       

87*

Clearance Lamp

   

88*

Identification Lamp

   

89

Safety Belts

   

90

Lift Axle Air / Weight Ratio

   

Note: Numbers marked with an asterisk (*) are visual defects. A Maryland State trooper or police officer in a participating police department can inspect the repair during daylight hours, as long as the weather is not inclement. A registered inspection mechanic at an authorized inspection also can inspect the repair.

 

 

Maryland State Police
Automotive Safety Enforcement Division (ASED)
6601 Ritchie Highway, NE
Glen Burnie, MD 21062

ASED@MDSP.ORG